MAPEGROUT ME05
Original price was: 28,00 د.إ.25,00 د.إCurrent price is: 25,00 د.إ. (incl. VAT)High performance, shrinkage compensated, high-flow micro-concrete and thick section grout
Technical Date Sheet
MAPEGROUT ME06
Original price was: 37,00 د.إ.35,00 د.إCurrent price is: 35,00 د.إ.BAG (incl. VAT)High strength, shrinkage compensated, super-flow micro-concrete.
Mapegrout ME 06 is used for structural repair where particular thickness and state of deterioration requires the use of high flow concrete and for, grouting of gaps with thickness ranging from 30-250mm.
Mixing ratio – One 25 kg of Mapegrout ME 06 with 3.1-3.4 litres of water.
Yield: 12.3 liters / 25 kg.
Packaging: 25 kg bags
Technical Date Sheet
Mapegrout Rapid
Original price was: 130,00 د.إ.125,00 د.إCurrent price is: 125,00 د.إ. (incl. VAT)Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
Where to use:
Fine-grained, natural-finish skimming layer for internal and external concrete, cementitious and lime-mortar render, old quartz paint, scratch-effect plastic coatings and glass or porcelain mosaics.
Application examples:
Levelling and finishing concrete walls, cementitious renders or cement lime mortar before painting.
- Smoothing walls, even over existing paint such as washable acrylic paints, quartz paints, textured paints, etc. as long as they are sound, clean and well anchored.
- Smoothing over glass or porcelain mosaics on walls.
- Smoothing gypsum wall-board panels (treated beforehand with Primer G).
- Smoothing mineral wood panels (such as Eraclit).
Packaging:Â 25 kg bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.4 mm.
Packaging: 25 kg bags.
TDS
ULTRAPLAN ECO
Original price was: 88,00 د.إ.85,00 د.إCurrent price is: 85,00 د.إ. (incl. VAT)Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.
Workability time: 20-30 minutes.
Thickness applied: from 1 to 10 mm.
Set to light foot traffic: approx. 3 hours.
Waiting time before laying: 12 hours for ceramic tiles, natural stone and resilient coverings, 24 hours for wood.
Application: trowel, rake or pump.
EMICODE: EC1 R Plus – very low emission.
Colour: pinky grey.
Storage: 12 months.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
Technical Date Sheet Â
ULTRAPLAN
Original price was: 118,00 د.إ.115,00 د.إCurrent price is: 115,00 د.إ. (incl. VAT)Ultra-fast drying self-levelling smoothing compound, for thicknesses from 1 to 10 mm per coat
ADVANTAGES:
- Application thickness from 1-10 mm per coat
- Application up to 20 mm if blended with quartz
- Suitable for hand or pump application
- Excellent self-levelling properties
- Excellent surface finish
- High bonding strength to the substrate
- High compressive and flexural strenght
- High abrasion resistance
- Ultra-quick hardening
- Lay ceramic after 3 hours and resilient and wood after 12 hours
- Exposure to castor wheels in accordance with EN 12529
- EMICODE EC1 Plus (very low emissions)
- Blauer Engel – DE – UZ 113
TDSÂ
MAPESIL AC
Original price was: 35,00 د.إ.32,00 د.إCurrent price is: 32,00 د.إ. (incl. VAT)ADVANTAGES:
- High elasticity
- Mould-resistant (BioBlock® technology)
- Solvent-free
- Strong and durable
- Maximum guarantee
- Perfect adhesion
- Smooth and elastic
- High thermal and chemical resistance
- Excellent durability
- Wide range of colours
TECHNICAL DATA:
Movement in service: 25%.
Modulus of elasticity at 100% elongation: 0.35 N/mm².
Shore A hardness: 20.
Workability time: 10 minutes.
Colours: 34 colours + transparent.
EMICODE: EC1 Plus – very low emission.
Application: extrusion gun.
Consumption: 3.1 linear metres per 310 ml cartridge (10×10 mm section).
Packaging: 310 ml cartridges.
.
TDS
QUARZO
Price range: 50,00 د.إ through 52,00 د.إ (incl. VAT)
ULTRALITE S1
120,00 د.إ (incl. VAT)One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic tiles and stone material.
Conformity of Ultralite S1 is declared in ITT certificates n° 25080237/Gi and n° 25110057/AG (TUM) issued by the Technische Universität München laboratory (Germany)
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: > 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S1 – deformable.
Colour: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
EMICODE: EC1 R Plus – very low emission.
Storage: 12 months.
Consumption: 1.5-2.5 kg/m².
Packaging: 15 kg bags.
Technical Date Sheet
MAPEGROUT T60
28,00 د.إ (incl. VAT)Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete.
Use Mapegrout T60 to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Mapegrout T60 is also recommended for repair work in tunnels, canals and water works in general.
Mapegrout T60, mixed with about 17% water, and 0.25 of Mapecure SRA?forms a very workable mortar with a thixotropic consistency that is easily applied on vertical surfaces without shuttering.
The product may be used without adding Mapecure SRA, when environmental conditions permit excellent curing.
Mapegrout T60 is applied by trowel, float or sprayer onto damp substrates that are sound, rough and free of loose particles, and been saturated with water beforehand.
Repairs up to 40 mm thick in a single coat can be made.
Mapegrout T60 meets the minimum requirements of EN 1504-3 standards for R4-class structural mortar.
Consumption
18.5 kg/m2 per cm of thickness.
Packaging
25 kg bags.
TDS
MAPELASTIC EASY
130,00 د.إ (incl. VAT)Two-component acrylic modified cementitious, flexible waterproof coating easy to apply for waterproofing balconies, terraces, and bathrooms.PACKAGING: Mapelastic Easy available in 24 kg kits.
- Component A: 18 kg bags
- Component B: 6 kg jerrycans
STORAGE: Mapelastic Easy component A may be stored for up to 12 months when contained in its original sealed packaging in a dry place. Mapelastic Easy component B may be stored for up to 24 months. Store Mapelastic Easy in a dry place and at a temperature of at least +5°C.
Technical Date Sheet
ISOLASTIC
Price range: 110,00 د.إ through 499,00 د.إ (incl. VAT)ADVANTAGES:
- Very fluid
- Improves adhesion
- Improves deformability
- Suitable for interior and exterior bonding
TECHNICAL DATA
Mixed with Kerabond Plus:
Pot life: over 8 hours.
Open time: 30 minutes.
Grouting:
– walls: 4-8 hours
– floors: 24-36 hours
Set to light foot traffic: 24-36 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12002: S2 – highly deformable
Application: Kerabond Plus: notched trowel n. 4 or 5 or 6.
Storage: 24 months. Protect from frost.
Consumption: 1-2 kg/m2.
Packaging: 6.6kg and 25kg drums
Technial Date Sheet
KERAPOXY
Price range: 195,00 د.إ through 355,00 د.إ (incl. VAT)ADVANTAGES:
- Excellent resistance to chemicals
- High hygiene, HACCP compliant
- High mechanical strength
- Waterproof and hygienic grouts
- Uniform colour that remains stable over the years
- Very low emission of VOC
Technical Date Sheet
KERAFLEX MAXI S1
Price range: 66,50 د.إ through 75,00 د.إ (incl. VAT)High-performance polymer modified cementitious adhesive.
Advantages:
- No vertical slip
- Extended open time
- High performance
- Suitable for laying large porcelain and natural stone tiles.
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S1 – deformable.
Colours: white and grey.
Application: N° 4, 5, 6 or 10 notched trowel.
Storage: 12 months.
Consumption: 1.2 kg/m ² per mm of thickness.
Packaging:
– grey: 25 kg bags;
– white: 25kg bags.
Technical Date Sheet
ADESILEX P9
Price range: 40,00 د.إ through 50,00 د.إ (incl. VAT)ADVANTAGES:
- Versatile
- Non-slip properties on vertical surfaces
- Extra white
- Excellent price/quality ratio
TECHNICAL DATA:
Pot life of mix: over 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Colours: off-white.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months
Packaging: 20kg bags
Technical Date Sheet
ADESILEX P7
Price range: 32,50 د.إ through 41,00 د.إ (incl. VAT)ADESILEX P7 is a High performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles.
WHERE TO USE
Interior and exterior bonding of ceramic tiles, porcelain and mosaics on floors, walls and ceilings. Also suitable for spot bonding of insulating materials such as expanded polystyrene, rock and glass wool, Eraclit®
(wood-cement panels), sound-deadening panels, etc.
PACKAGING
Adesilex P7 white and grey are available in 25 kg bags.
STORAGE
Adesilex P7 can be stored 12 months in a normal environment in original packaging.
Technical Date Sheet
KERABOND T
Price range: 19,00 د.إ through 28,00 د.إ (incl. VAT)For interior fixing of ceramic tiles and ceramic mosaics,
double-fired or single-fired on floors and walls on
cementitious substrates or gypsum substrates (for the
latter with prior application of a suitable primer).
Some application examples
For fixing paper faced or mesh backed ceramic
mosaics and absorbent double-fired or single-fired
ceramic tiles on:
• cement-rendered walls;
• brick walls;
• cementitious based screeds, sufficiently dry and
cured.
TDS