webercol Premium (25 Kg)
Price range: 61,00 د.إ through 64,00 د.إ (incl. VAT)Webercol premium is a high performance cement-based
polymer modified adhesive for fixing all types of tiles and
stones onto interior and exterior floors and walls. Webercol
premium has very strong bonding in wet areas. It is suitable
to fix tiles on low porosity substrates such as power floated
concrete.
Webercol premium exceeds standard requirements EN12004
and is classified as C2TE. werbercol Premium is non-sagging
and slip resistance “T” with ability to perform in extended
open time conditions “E”.
Technical Date Sheet
Weberfloor Rapid (50 kg)
Original price was: 20,00 د.إ.18,99 د.إCurrent price is: 18,99 د.إ. (incl. VAT)weberfloor rapid is a rapid drying, ready to use polymer modified hydraulic binder, shrinkage controlled semi-dry floor screed. Comparing to the traditional semi-dry screed, this premixed screed is the best solution for use in all instances where logistics conditions at sites are complicated. Additionally, it improves the quality, strength and drying speed of the screed over standard cement screeds.
Technical Date Sheet
Weber Joint Grout
Original price was: 19,00 د.إ.17,00 د.إCurrent price is: 17,00 د.إ. (incl. VAT)High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints up to 20 mm wide, with very low emission of volatile organic compounds and offset Greenhouse Gas Emissions
Technical Date Sheet
Weberpox easy (4 kg)
Original price was: 89,00 د.إ.87,00 د.إCurrent price is: 87,00 د.إ. (incl. VAT)Weberepox easy is a 100% reactive two components epoxy
tile adhesive and tile grout product with very easy water
cleanable properties exceeding the requirement of the
standard ANSI 118.3, excellent chemical resistance, high
strength, and easy application. It is designed for numerous
application needs. In addition to its waterproofing and
excellent workability properties,
Technical Data Sheet
Webertec 301- 25 Kg
Original price was: 26,00 د.إ.24,20 د.إCurrent price is: 24,20 د.إ. (incl. VAT)Non shrink structural grout
Technical Date Sheet
weberpremix SP-11
23,00 د.إ (incl. VAT)weberpremix SP-11 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability, bonding and curing. weberpremix SP-11 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up. weberpremix SP-11 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. For the application on Light Weight concrete blocks, it is recommended to use weberpremix SP-3 FL or weberpremix SP-33.
Technical Date Sheet
WeberTec MC 1
Original price was: 23,00 د.إ.20,90 د.إCurrent price is: 20,90 د.إ. (incl. VAT)webertec MC1 is a durable mono-component micro concrete
made of selected sand and aggregates, special cement,
green binders and additives. Its special formulation, flowable
consitency and convenient packaging makes it easy to mix and
to place in congested areas.
webertec MC1 is recommended where high compressive
strength, high thicknesses and durability are required.
webertec MC1 is specially formulated to produce a shrinkage
compensating micro concrete that can be applied in
thicknesses ranging from 30mm to 200mm per layer although
greater thickness up to 300mm can be practiced depending
on the design of the repair job and level of steel reinforcement.
Technical Date Sheet
Webertec 301 pc- 25 Kg
Original price was: 21,00 د.إ.19,00 د.إCurrent price is: 19,00 د.إ. (incl. VAT)Cementitious non-shrink precision grout
- Easy to apply
- High strength
- Flowable
- Surface of application
Wall, Roof, Floor
Technical Date Sheet
Weberbloc Fix N (50 Kg)
Original price was: 18,00 د.إ.16,50 د.إCurrent price is: 16,50 د.إ. (incl. VAT)Block and brick laying mortar
weberbloc fix N is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, better bonding and water retention.weberbloc fix N is available with and without lime. weberbloc fix N is particularly adapted for mounting regular/hollow blocks, stones, and bricks and to fill gaps between concrete and bricks.
Technical Date Sheet
Weber Dry 360 PU
470,00 د.إdrum (incl. VAT)Weber Dry 3600 PU is Liquid applied polyurethane waterproofing membrane-UV Resistant
Weber Dry 3600 PU is a 1-component liquid applied membrane
made of polyurethane specially designed for waterproofing.
Its outstanding performances allow protection and
waterproofing of many areas such as:
• Water supply channel
• Water storage tanks
• Flowerbeds and fountains
• Rooftops
• Crack bridging
• Under-tile wet areas (pools, bathrooms, balconies, terraces…)
When applied, weberdry 360 PU creates a continuous
watertight seal. It allows moisture vapor transmission. It has
also excellent adhesion to almost any surface: concrete,
metal, bitumen membranes, acrylic paints… It keeps
outstanding performances for a very long period. Weber Dry 3600 PU is applicable by brush, roller or spray gun. For best
results, the temperature during application and cure should
be between 5°C and 35°C. Low temperatures retard cure
while high temperature speed up curing.
Technical Data Sheet
Weberdry 110 FX (24.8Kg)
Price range: 250,00 د.إ through 265,00 د.إ (incl. VAT)weberdry 110 FX is a two component polymer modified cementitious coating: Powder made of cements, fillers and admixtures. Liquid based on resins and additives. It is available in Grey and White . weberdry 110 FX cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in potable water tanks, reservoirs, canals and tunnels.
Technical Data Sheet
WEBERAD 225 MB
Price range: 180,00 د.إ through 1.490,00 د.إ (incl. VAT)weber.ad 225 MB contains no iron. Added to mortar,
it increases internal and external bonding of cement
and confers to the product strength, waterproofing,
flexibility and resistance to abrasion and to chemicals.
Technial Data Sheet
webertec 311 MC
Original price was: 22,00 د.إ.21,00 د.إCurrent price is: 21,00 د.إ. (incl. VAT)webertec 311 MC is a ready-to-use micro concrete made of selected sand and aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 311 MC is specially formulated to produce a shrinkage compensating micro concrete with high performance. webertec 311 MC can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.
Technical Date Sheet
Weber Jointseal Pu 300
Price range: 16,80 د.إ through 17,00 د.إ (incl. VAT)weber jointseal PU 300 is a moisture-curing, 1 component,
polyurethane-based, non-sag elastomeric sealant. This product
is designed to have a long term durability and excellent UV
resistance. weber jointseal PU 300 doesn’t stain the marble or
granite stone.
TDS
Weberdry 136 FX (22.5Kg)
Price range: 130,00 د.إ through 140,00 د.إ (incl. VAT)weberdry 136 FX is a two-component cement latex modified elastomeric waterproofing coating used as a waterproof lining over masonry and concrete. weberdry 136 FX is composed of a cement mortar with additives, and of a liquid component. Mixed together on site, the product is easy to apply and is used as an effective protection coating on walls against: water-borne salts (chlorides, sulfates), wear, weather and chemicals, atmospheric gases and carbonation, from rusting of steel reinforcements. It is a non shrink , non-flammable mortar . weberdry 136 FX is available in white and grey colors. For other colors, contact Company’s Technical Department.
Technical Data Sheet
Biflex SL 4mm-180 (10m2)
145,00 د.إ (incl. VAT)A high performance elastomeric waterproofing membrane which combines the ability to withstand high ambient temperature with the usual characteristics of an SBS membrane of high flexibility at low temperature that makes it easy to apply at sub-zero temperature.