WeberCol Fix (20 KG)

Price range: 13,00 د.إ through 16,50 د.إ (incl. VAT)

webercol fix is a ready-mix cement-based tile adhesive for
internal use. col fix is polymer modified and water resistant
with a strong bonding effect.

Technical Date Sheet

Weberbloc Fix N (50 Kg)

Original price was: 18,00 د.إ.Current price is: 16,50 د.إ. (incl. VAT)

Block and brick laying mortar

weberbloc fix N is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, better bonding and water retention.weberbloc fix N is available with and without lime. weberbloc fix N is particularly adapted for mounting regular/hollow blocks, stones, and bricks and to fill gaps between concrete and bricks.

Technical Date Sheet

Weber Jointseal Pu 300

Price range: 16,80 د.إ through 17,00 د.إ (incl. VAT)

weber jointseal PU 300 is a moisture-curing, 1 component,
polyurethane-based, non-sag elastomeric sealant. This product
is designed to have a long term durability and excellent UV
resistance. weber jointseal PU 300 doesn’t stain the marble or
granite stone.

TDS

 

Weber Joint Grout

Original price was: 19,00 د.إ.Current price is: 17,00 د.إ. (incl. VAT)

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints up to 20 mm wide, with very low emission of volatile organic compounds and offset Greenhouse Gas Emissions

Technical Date Sheet

Weberfloor Rapid (50 kg)

Original price was: 20,00 د.إ.Current price is: 18,99 د.إ. (incl. VAT)

weberfloor rapid is a rapid drying, ready to use polymer modified hydraulic binder, shrinkage controlled semi-dry floor screed. Comparing to the traditional semi-dry screed, this premixed screed is the best solution for use in all instances where logistics conditions at sites are complicated. Additionally, it improves the quality, strength and drying speed of the screed over standard cement screeds.

Technical Date Sheet  

Webertec 301 pc- 25 Kg

Original price was: 21,00 د.إ.Current price is: 19,00 د.إ. (incl. VAT)

Cementitious non-shrink precision grout

webertec 301PC is a ready-to-use grout made of selected aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 301PC is specially formulated to produce a shrinkage compensating grout with excellent adhesion.
  • Easy to apply
  • High strength
  • Flowable

 

  • Surface of application

Wall, Roof, Floor

Technical Date Sheet 

WEBERCOL PRO (25 KG)

Price range: 19,50 د.إ through 21,00 د.إ (incl. VAT)

Webercol Pro is water resistant and can be used for fixing a
wide range of tiles (ceramic, sandstone, marble, porcelain,
etc.) on the following substrates:
• Concrete walls
• Cementitious plasters and renders
• Screed/concrete floors

Technical Date Sheet

Weberpremix SP-33 (50 kg)

Original price was: 21,00 د.إ.Current price is: 19,50 د.إ. (incl. VAT)

weberpremix SP-33 is a fiber reinforced cement-lime ready
mix plaster used for traditional plastering works in a clean
and speedy manner, while keeping a homogeneous mix. Due
to its high content in fibers and additives, it allows better
shrinkage control as well as improved workability, curing
and impermeability. weberpremix SP-33 is a special product
dedicated for light weight blocks (Autoclaved Aerated
Concrete Blocks) that can be applied for external and internal
plastering without any rush coat. It can also be used for normal
masonry blocks without rush coat. weberpremix SP-33 can
be applied on concrete provided that a suitable rush coat is
applied before (weberpremix SRC-2 or weberpremix SRC-S).
weberpremix SP-33 can be applied traditionally by hand or by
using modern plaster-spraying machines. It should not be used
on painted surfaces or floors.
weberpremix SP-33 includes all the features of the weberpremix
SP-11, that makes it a perfect solution for all substrates

Technical Date Sheet

Weberbloc Fix Lw (50 Kg)

20,00 د.إ (incl. VAT)

weberbloc fix LW is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, bonding and water retention. weberbloc fix LW is particularly adapted for mounting light weight blocks.

Technical Date Sheet

WeberTec MC 1

Original price was: 23,00 د.إ.Current price is: 20,90 د.إ. (incl. VAT)

webertec MC1 is a durable mono-component micro concrete
made of selected sand and aggregates, special cement,
green binders and additives. Its special formulation, flowable
consitency and convenient packaging makes it easy to mix and
to place in congested areas.
webertec MC1 is recommended where high compressive
strength, high thicknesses and durability are required.
webertec MC1 is specially formulated to produce a shrinkage
compensating micro concrete that can be applied in
thicknesses ranging from 30mm to 200mm per layer although
greater thickness up to 300mm can be practiced depending
on the design of the repair job and level of steel reinforcement.

Technical Date Sheet 

Weberep 331 Tx (25 Kg)

Original price was: 23,00 د.إ.Current price is: 21,00 د.إ. (incl. VAT)

weberep 331 TX is a ready-to-use mortar mainly made of sand (reconstituted grain size range), special cement, fibers and special additives that provide special properties: non-shrinking, thixotropic, high strength, high adhesion, compactness; its closed porosity slows down carbonation.

Technical Date Sheet 

webertec 311 MC

Original price was: 22,00 د.إ.Current price is: 21,00 د.إ. (incl. VAT)

webertec 311 MC is a ready-to-use micro concrete made of selected sand and aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 311 MC is specially formulated to produce a shrinkage compensating micro concrete with high performance. webertec 311 MC can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.

Technical Date Sheet

weberpremix SP-11

23,00 د.إ (incl. VAT)

weberpremix SP-11 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability, bonding and curing. weberpremix SP-11 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up. weberpremix SP-11 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. For the application on Light Weight concrete blocks, it is recommended to use weberpremix SP-3 FL or weberpremix SP-33.

Technical Date Sheet

Webertec 301- 25 Kg

Original price was: 26,00 د.إ.Current price is: 24,20 د.إ. (incl. VAT)

Non shrink structural grout

webertec 301 is a ready-to-use mortar made of selected aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 301 is specially formulated to produce a shrinkage compensating mortar with excellent adhesion.

Technical Date Sheet 

Weberep 332 FR (25 Kg)

Original price was: 26,00 د.إ.Current price is: 25,00 د.إ. (incl. VAT)

Weberep 332 FR is a ready-to-use mortar composed of silica
sand (reconstituted grain size range), special cement, microsilica,
fibers, and additives that provide specific properties: non
shrinking, thixotropic, high strength, high adhesion, and
compactness. The highly compacted grains slows down
carbonation.

Technical Date Sheet

WEBERCOL PLUS (25KG)

Price range: 26,99 د.إ through 30,99 د.إ (incl. VAT)

webercol plus is a ready mix cement-based high
performance polymer “latex” modified tile adhesive for
internal and external use. col plus has a strong bonding
effect, used for adhering large tiles, or in cases of permanent
exposure to high degrees of humidity. It can be used in a
damp environment, and is water resistant. col plus is
non-sagging and classified “T” (slip resistant) according to EN
12004 for tile adhesives

Technical Date Sheet