Weberep 331 Tx (25 Kg)

Original price was: 23,00 د.إ.Current price is: 21,00 د.إ. (incl. VAT)

weberep 331 TX is a ready-to-use mortar mainly made of sand (reconstituted grain size range), special cement, fibers and special additives that provide special properties: non-shrinking, thixotropic, high strength, high adhesion, compactness; its closed porosity slows down carbonation.

Technical Date Sheet 

Weberfloor 535 FD (25kg)

78,00 د.إ (incl. VAT)

Weberfloor 535 FD is a fast drying, low shrinkage and self
leveling cementitious underlayment flooring compound.
Weberfloor 535 FD is to be used internally for smoothing and
levelling differences in thicknesses from 2 to 30 mm, on new
or existing substrates. Weberfloor 535 FD has fast covering
property which can receive all kinds of flooring covering at
24 hours from the application. It has good loads and
abrasion resistance which enables the material to be used in
areas subject to whirl activity that can result from trolleys
and chairs. It provides a fast setting tough surface that will
accept light traffic after 3-4

Technical Date Sheet

Weberfloor Smoth FD

Original price was: 55,00 د.إ.Current price is: 52,00 د.إ. (incl. VAT)

Weberfloor smooth FD is a fine smoothing, and low shrinkage
flooring leveling compound with fast drying property
allowing fast covering with different type of floor finishes
between 12 – 48 hours. Weberfloor smooth FD is to be used
internally for smoothing and levelling differences in
thicknesses from 1 to 10 mm, on new or existing substrates
that can receive all kinds of flooring covering. It has good
loads and abrasion resistance which enables the material to
be used in areas subject to whirl activity that can result from
trolleys and chairs. It provides a fast setting tough surface
that will accept light traffic at 3-4 hours depending on the
thickness and site conditions.

Technical Date Sheet

Weberep Epo 420 SC Kit (27.8 Kg)

215,00 د.إ (incl. VAT)

weberep epo 420 SC is a three- component system based on epoxy resins and selected fillers. It provides a resilient system for floor repairs and resurfacing, non absorbent and dust free. The selected fillers enable the system to hold thickness and give weberep epo 420 SC a high resistance to abrasion, as well as a high tensile and compressive strength.

Technical Date Sheet

Weberep 360 FFR (20 Kg)

Original price was: 30,00 د.إ.Current price is: 29,00 د.إ. (incl. VAT)

Weberep 360 FFR is a dry pre-mixed polymer-modified
cementitious coating based on hydraulic binders, siliceous
filler, water retaining agents and other admixtures. Weberep
360 FFR is available in white and light-grey.

Technical Date Sheet

Weberep 332 FR (25 Kg)

Original price was: 26,00 د.إ.Current price is: 25,00 د.إ. (incl. VAT)

Weberep 332 FR is a ready-to-use mortar composed of silica
sand (reconstituted grain size range), special cement, microsilica,
fibers, and additives that provide specific properties: non
shrinking, thixotropic, high strength, high adhesion, and
compactness. The highly compacted grains slows down
carbonation.

Technical Date Sheet

webercol Flex Kit (19.565Kg)

65,00 د.إ (incl. VAT)

Webercol flex is a two-component cement-based polymer
modified, flexible, waterproof tile adhesive for internal &
external use. It is a ready mix powder containing cement,
siliceous sand and additives.
Webercol flex has outstanding qualities such as high bonding
strength, high resistance to water and chemicals, water
tightness and flexibility.
It is used internally and externally with a wide range of small
to large tiles, and in cases of permanent exposure to high
degrees of humidity.

Technical Date Sheet

Weberdry 116 FX (18 KG)

Price range: 57,00 د.إ through 68,00 د.إ (incl. VAT)

weberdry 116 FX is a cement based two component polymer
modified waterproofing slurry, available in grey and white.
It is applied to concrete and mortar structures to prevent water
infiltration. Protection and waterproofing of concrete surfaces
and facades.
weberdry 116 FX must be used on damp cement based
substrate.

Technical Date Sheet  

Weberpremix SP-33 (50 kg)

Original price was: 21,00 د.إ.Current price is: 19,50 د.إ. (incl. VAT)

weberpremix SP-33 is a fiber reinforced cement-lime ready
mix plaster used for traditional plastering works in a clean
and speedy manner, while keeping a homogeneous mix. Due
to its high content in fibers and additives, it allows better
shrinkage control as well as improved workability, curing
and impermeability. weberpremix SP-33 is a special product
dedicated for light weight blocks (Autoclaved Aerated
Concrete Blocks) that can be applied for external and internal
plastering without any rush coat. It can also be used for normal
masonry blocks without rush coat. weberpremix SP-33 can
be applied on concrete provided that a suitable rush coat is
applied before (weberpremix SRC-2 or weberpremix SRC-S).
weberpremix SP-33 can be applied traditionally by hand or by
using modern plaster-spraying machines. It should not be used
on painted surfaces or floors.
weberpremix SP-33 includes all the features of the weberpremix
SP-11, that makes it a perfect solution for all substrates

Technical Date Sheet

weberpremix Src-S (50Kg)

Original price was: 33,00 د.إ.Current price is: 32,00 د.إ. (incl. VAT)

Weberpremix SRC-S is a ready mixed mortar based on mineral
bonding agent used for preparing surfaces before the rendering. It improves the adhesion of the new plaster, cement or
gypsum based. It is applied on smooth very dense concrete
and concrete containing SCMs (GGBS, SilIca fume, Fly ash,
Metakaolin

Technical Date Sheet

Weberbloc Fix Lw (50 Kg)

20,00 د.إ (incl. VAT)

weberbloc fix LW is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, bonding and water retention. weberbloc fix LW is particularly adapted for mounting light weight blocks.

Technical Date Sheet

WEBERCOL PRO (25 KG)

Price range: 19,50 د.إ through 21,00 د.إ (incl. VAT)

Webercol Pro is water resistant and can be used for fixing a
wide range of tiles (ceramic, sandstone, marble, porcelain,
etc.) on the following substrates:
• Concrete walls
• Cementitious plasters and renders
• Screed/concrete floors

Technical Date Sheet

WEBERCOL PLUS (25KG)

Price range: 26,99 د.إ through 30,99 د.إ (incl. VAT)

webercol plus is a ready mix cement-based high
performance polymer “latex” modified tile adhesive for
internal and external use. col plus has a strong bonding
effect, used for adhering large tiles, or in cases of permanent
exposure to high degrees of humidity. It can be used in a
damp environment, and is water resistant. col plus is
non-sagging and classified “T” (slip resistant) according to EN
12004 for tile adhesives

Technical Date Sheet

WeberCol Fix (20 KG)

Price range: 13,00 د.إ through 16,50 د.إ (incl. VAT)

webercol fix is a ready-mix cement-based tile adhesive for
internal use. col fix is polymer modified and water resistant
with a strong bonding effect.

Technical Date Sheet

Biflex PL 4mm/180 (10m2)

145,00 د.إ (incl. VAT)

A high performance elastomeric waterproofing membrane
which combines the ability to withstand high ambient
temperature with the usual characteristics of an SBS
membrane of high flexibility at low temperature that makes
it easy to apply at sub-zero temperature.
It is suitable for all types of waterproofing works including
roofs, terraces, car parks, pile capping, foundation works,
basement tankings, where high flexibility and malleability are
required

Technical Date Sheet