Shop

Lata Screed PM-20

17,00 د.إ (incl. VAT)

LATASCREED PM-20 ready to use screeding mix, blend of carefully selected raw materials,
Portland cement, polymer and graded fillers. When mixed with water produces quality screed with
controlled shrinkage and improved mechanical strength for early installation. The screed follows the
code of practice of BS 8204-1:2003 and EN 13813:2002.

TDS

L 302 WATERPROOFING SLURRY

250,00 د.إ (incl. VAT)

302 Waterproof slurry is a High quality; Polymer fortified cementitious waterproofing material.

TDS

Weberdry 136 FX (22.5Kg)

Price range: 130,00 د.إ through 140,00 د.إ (incl. VAT)

weberdry 136 FX is a two-component cement latex modified elastomeric waterproofing coating used as a waterproof lining over masonry and concrete. weberdry 136 FX is composed of a cement mortar with additives, and of a liquid component. Mixed together on site, the product is easy to apply and is used as an effective protection coating on walls against: water-borne salts (chlorides, sulfates), wear, weather and chemicals, atmospheric gases and carbonation, from rusting of steel reinforcements. It is a non shrink , non-flammable mortar . weberdry 136 FX is available in white and grey colors. For other colors, contact Company’s Technical Department.

Technical Data Sheet

Biflex SL 4mm-180 (10m2)

145,00 د.إ (incl. VAT)

A high performance elastomeric waterproofing membrane which combines the ability to withstand high ambient temperature with the usual characteristics of an SBS membrane of high flexibility at low temperature that makes it easy to apply at sub-zero temperature.

Technical Date Sheet

Weberep 331 Tx (25 Kg)

Original price was: 23,00 د.إ.Current price is: 21,00 د.إ. (incl. VAT)

weberep 331 TX is a ready-to-use mortar mainly made of sand (reconstituted grain size range), special cement, fibers and special additives that provide special properties: non-shrinking, thixotropic, high strength, high adhesion, compactness; its closed porosity slows down carbonation.

Technical Date Sheet 

Level C 20

55,00 د.إ (incl. VAT)

A cement-based easy-to-use, self-leveling underlayment designed for use over
various substrates including concrete and ceramic tile. LEVEL C20 provides a
smooth and flat surface on which finished floor goods can be installed, and it can
be placed from 3 – 10 mm in a single lift.

Technical Date Sheet

Weberep Epo 420 SC Kit (27.8 Kg)

215,00 د.إ (incl. VAT)

weberep epo 420 SC is a three- component system based on epoxy resins and selected fillers. It provides a resilient system for floor repairs and resurfacing, non absorbent and dust free. The selected fillers enable the system to hold thickness and give weberep epo 420 SC a high resistance to abrasion, as well as a high tensile and compressive strength.

Technical Date Sheet

Weberep 360 FFR (20 Kg)

Original price was: 32,00 د.إ.Current price is: 30,00 د.إ. (incl. VAT)

Weberep 360 FFR is a dry pre-mixed polymer-modified
cementitious coating based on hydraulic binders, siliceous
filler, water retaining agents and other admixtures. Weberep
360 FFR is available in white and light-grey.

Technical Date Sheet

Weberep 332 FR (25 Kg)

Original price was: 26,00 د.إ.Current price is: 25,00 د.إ. (incl. VAT)

Weberep 332 FR is a ready-to-use mortar composed of silica
sand (reconstituted grain size range), special cement, microsilica,
fibers, and additives that provide specific properties: non
shrinking, thixotropic, high strength, high adhesion, and
compactness. The highly compacted grains slows down
carbonation.

Technical Date Sheet

Laticrete 254 platinum

Price range: 59,00 د.إ through 65,00 د.إ (incl. VAT)

254 PLATINUM is the ultimate one-step, polymer fortified,
thin-set mortar for interior and exterior installation of
ceramic tile, porcelain tile, thin porcelain tile, stone, quarry
tile, pavers and thin brick. 254 PLATINUM, designed to
just mix with water, has a long open time (E) with
unsurpassed adhesion, workability, deformability (S1),
and minimal vertical slip (T)

Technical Date Sheet

HYDRO BAN

250,00 د.إ (incl. VAT)

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.

Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

TDS

Lata Screed PM 30

17,50 د.إ (incl. VAT)

LATASCREED PM-30 ready to use screeding mix, blend of carefully selected raw materials, Portland cement, polymer, fibers, and graded fillers. When mixed with water produces quality screed with controlled shrinkage and high mechanical strength ready for early installation. The screed follows the code of practice of BS 8204-1:2003 and EN 13813:2002.

Technical Date Sheet

Plaster Mix M

18,00 د.إ (incl. VAT)

Plaster Mix M is a cement-based plastering material composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar. Plaster Mix M is a high-quality product that contains a special shrinkage control additive. It is designed for manual hand application for areas that can not be accessed by machine application. Plaster Mix M can be used by plaster spray machines too. Plaster Mix M is generally applied in thicknesses ranging from 5 to 20mm per layer

Technical Data Sheet

weberpremix SP-11

23,00 د.إ (incl. VAT)

weberpremix SP-11 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability, bonding and curing. weberpremix SP-11 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up. weberpremix SP-11 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. For the application on Light Weight concrete blocks, it is recommended to use weberpremix SP-3 FL or weberpremix SP-33.

Technical Date Sheet

Vetoset CA540 (20 KG)

Price range: 27,00 د.إ through 30,00 د.إ (incl. VAT)

Vetoset CA540 is a cement based professional grade highly deformable tile adhesive that works with most types of tiles and flexible substrates. The product is composed of a blend of cements, carefully selected aggregates, special additives and polymers that provide Vetoset CA540 with its uniqe properties. The product is suitable for internal as well as external use.

Technical Data Sheet

webercol Flex Kit (19.565Kg)

65,00 د.إ (incl. VAT)

Webercol flex is a two-component cement-based polymer
modified, flexible, waterproof tile adhesive for internal &
external use. It is a ready mix powder containing cement,
siliceous sand and additives.
Webercol flex has outstanding qualities such as high bonding
strength, high resistance to water and chemicals, water
tightness and flexibility.
It is used internally and externally with a wide range of small
to large tiles, and in cases of permanent exposure to high
degrees of humidity.

Technical Date Sheet

Online store with a wide selection of Building material.

Discover a vast selection of high-quality building materials at unbeatable prices. From foundation to finishing touches, we have everything you need for your construction or renovation projects. Shop with ease, enjoy fast delivery, and build with confidence.

Building material with a modern form of art

Transform your spaces with building materials that blend durability with modern artistry. Our collection combines innovative designs with high-quality materials, creating structures that are both functional and visually stunning. Build with style, strength, and sophistication.