Shop
Weber Dry 360 PU
470,00 د.إdrum (incl. VAT)Weber Dry 3600 PU is Liquid applied polyurethane waterproofing membrane-UV Resistant
Weber Dry 3600 PU is a 1-component liquid applied membrane
made of polyurethane specially designed for waterproofing.
Its outstanding performances allow protection and
waterproofing of many areas such as:
• Water supply channel
• Water storage tanks
• Flowerbeds and fountains
• Rooftops
• Crack bridging
• Under-tile wet areas (pools, bathrooms, balconies, terraces…)
When applied, weberdry 360 PU creates a continuous
watertight seal. It allows moisture vapor transmission. It has
also excellent adhesion to almost any surface: concrete,
metal, bitumen membranes, acrylic paints… It keeps
outstanding performances for a very long period. Weber Dry 3600 PU is applicable by brush, roller or spray gun. For best
results, the temperature during application and cure should
be between 5°C and 35°C. Low temperatures retard cure
while high temperature speed up curing.
Technical Data Sheet
ULTRABOND ECO 4 LVT
298,00 د.إdrum (incl. VAT)ULTRABOND ECO 4 LVT
Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Density (g/cm³): 1.20.
Waiting time: 0-10 minutes.
Open time: 20-30 minutes.
Set to light foot traffic: 3-5 hours.
Ready for use: 48-72 hours.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months. Protect from frost.
Application: N° 1 notched trowel, TKB A1, A2.
Consumption: Mapei N° 1 trowel: 0.25 to 0.30 kg/m².
Packaging: 16 kg and 5 kg drums.
Technical Date Sheet
PRIMER G
Price range: 90,00 د.إ through 390,00 د.إ (incl. VAT)PRIMER G
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 – extremely low emission level.
Storage: 12 months. Protect from frost.
0.1-0.2 kg/m2 depending on use.Packaging
25-10-5 kg drums and 12×1 kg packs.
Technical Data Sheet
TOPCEM PRONTO
Original price was: 30,00 د.إ.28,00 د.إCurrent price is: 28,00 د.إ. (incl. VAT)Ready-mixed mortar with high thermal conductivity, ideal for heated screeds.
ADVANTAGES:
- High thermal conductivity, ideal for heated screeds
- Ready to use
- Rapid-drying
- High mechanical strength
- Negligible hygrometric shrinkage
Technnical Date Sheet
Weberdry 110 FX (24.8Kg)
Price range: 250,00 د.إ through 265,00 د.إ (incl. VAT)weberdry 110 FX is a two component polymer modified cementitious coating: Powder made of cements, fillers and admixtures. Liquid based on resins and additives. It is available in Grey and White . weberdry 110 FX cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in potable water tanks, reservoirs, canals and tunnels.
Technical Data Sheet
Eco Prim T Plus
Original price was: 750,00 د.إ.700,00 د.إCurrent price is: 700,00 د.إ. (incl. VAT)Universal acrylic primer for all types of absorbent and non-absorbent substrates
ADVANTAGES:
- Universal primer
- May be diluted up to 1:4 with water according to area of use
- Easy to apply with a brush or roller
- Suitable for use on epoxy or polyurethane waterproofing primers
- Adhesion promoter
- Insulator between gypsum and concrete
- Dust fixative
- Absorption regulator
- For floors and walls
- EMICODE EC1 PLUS – Very low emission of volatile organic compounds (VOC)
- Blauer Engel – DE – UZ 113
- Consumption 30-150 g/m2
- Drying time 0-60 minutes according to area of use
Techncial Date Sheet
MAPEGROUT ME05
Original price was: 28,00 د.إ.25,00 د.إCurrent price is: 25,00 د.إ. (incl. VAT)High performance, shrinkage compensated, high-flow micro-concrete and thick section grout
Technical Date Sheet
MAPEGROUT ME06
Original price was: 37,00 د.إ.35,00 د.إCurrent price is: 35,00 د.إ.BAG (incl. VAT)High strength, shrinkage compensated, super-flow micro-concrete.
Mapegrout ME 06 is used for structural repair where particular thickness and state of deterioration requires the use of high flow concrete and for, grouting of gaps with thickness ranging from 30-250mm.
Mixing ratio – One 25 kg of Mapegrout ME 06 with 3.1-3.4 litres of water.
Yield: 12.3 liters / 25 kg.
Packaging: 25 kg bags
Technical Date Sheet
Mapegrout Rapid
Original price was: 130,00 د.إ.125,00 د.إCurrent price is: 125,00 د.إ. (incl. VAT)Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
Where to use:
Fine-grained, natural-finish skimming layer for internal and external concrete, cementitious and lime-mortar render, old quartz paint, scratch-effect plastic coatings and glass or porcelain mosaics.
Application examples:
Levelling and finishing concrete walls, cementitious renders or cement lime mortar before painting.
- Smoothing walls, even over existing paint such as washable acrylic paints, quartz paints, textured paints, etc. as long as they are sound, clean and well anchored.
- Smoothing over glass or porcelain mosaics on walls.
- Smoothing gypsum wall-board panels (treated beforehand with Primer G).
- Smoothing mineral wood panels (such as Eraclit).
Packaging: 25 kg bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.4 mm.
Packaging: 25 kg bags.
TDS
ULTRAPLAN ECO
Original price was: 88,00 د.إ.85,00 د.إCurrent price is: 85,00 د.إ. (incl. VAT)Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.
Workability time: 20-30 minutes.
Thickness applied: from 1 to 10 mm.
Set to light foot traffic: approx. 3 hours.
Waiting time before laying: 12 hours for ceramic tiles, natural stone and resilient coverings, 24 hours for wood.
Application: trowel, rake or pump.
EMICODE: EC1 R Plus – very low emission.
Colour: pinky grey.
Storage: 12 months.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
Technical Date Sheet
ULTRAPLAN
Original price was: 118,00 د.إ.115,00 د.إCurrent price is: 115,00 د.إ. (incl. VAT)Ultra-fast drying self-levelling smoothing compound, for thicknesses from 1 to 10 mm per coat
ADVANTAGES:
- Application thickness from 1-10 mm per coat
- Application up to 20 mm if blended with quartz
- Suitable for hand or pump application
- Excellent self-levelling properties
- Excellent surface finish
- High bonding strength to the substrate
- High compressive and flexural strenght
- High abrasion resistance
- Ultra-quick hardening
- Lay ceramic after 3 hours and resilient and wood after 12 hours
- Exposure to castor wheels in accordance with EN 12529
- EMICODE EC1 Plus (very low emissions)
- Blauer Engel – DE – UZ 113
TDS
MAPESIL AC
Original price was: 35,00 د.إ.32,00 د.إCurrent price is: 32,00 د.إ. (incl. VAT)ADVANTAGES:
- High elasticity
- Mould-resistant (BioBlock® technology)
- Solvent-free
- Strong and durable
- Maximum guarantee
- Perfect adhesion
- Smooth and elastic
- High thermal and chemical resistance
- Excellent durability
- Wide range of colours
TECHNICAL DATA:
Movement in service: 25%.
Modulus of elasticity at 100% elongation: 0.35 N/mm².
Shore A hardness: 20.
Workability time: 10 minutes.
Colours: 34 colours + transparent.
EMICODE: EC1 Plus – very low emission.
Application: extrusion gun.
Consumption: 3.1 linear metres per 310 ml cartridge (10×10 mm section).
Packaging: 310 ml cartridges.
.
TDS
QUARZO
Price range: 50,00 د.إ through 52,00 د.إ (incl. VAT)
MAPEI Ultralite S2 (11.3KG)
Price range: 77,00 د.إ through 88,00 د.إ25 KG (incl. VAT)Premium, Highly Deformable, Lightweight, Gauged-Tile Mortar with Polymer
MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.
TDS
ULTRALITE S1
120,00 د.إ (incl. VAT)One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic tiles and stone material.
Conformity of Ultralite S1 is declared in ITT certificates n° 25080237/Gi and n° 25110057/AG (TUM) issued by the Technische Universität München laboratory (Germany)
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: > 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S1 – deformable.
Colour: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
EMICODE: EC1 R Plus – very low emission.
Storage: 12 months.
Consumption: 1.5-2.5 kg/m².
Packaging: 15 kg bags.
Technical Date Sheet
MAPEGROUT T60
28,00 د.إ (incl. VAT)Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete.
Use Mapegrout T60 to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Mapegrout T60 is also recommended for repair work in tunnels, canals and water works in general.
Mapegrout T60, mixed with about 17% water, and 0.25 of Mapecure SRA?forms a very workable mortar with a thixotropic consistency that is easily applied on vertical surfaces without shuttering.
The product may be used without adding Mapecure SRA, when environmental conditions permit excellent curing.
Mapegrout T60 is applied by trowel, float or sprayer onto damp substrates that are sound, rough and free of loose particles, and been saturated with water beforehand.
Repairs up to 40 mm thick in a single coat can be made.
Mapegrout T60 meets the minimum requirements of EN 1504-3 standards for R4-class structural mortar.
Consumption
18.5 kg/m2 per cm of thickness.
Packaging
25 kg bags.
TDS
Online store with a wide selection of Building material.
Discover a vast selection of high-quality building materials at unbeatable prices. From foundation to finishing touches, we have everything you need for your construction or renovation projects. Shop with ease, enjoy fast delivery, and build with confidence.
Building material with a modern form of art
Transform your spaces with building materials that blend durability with modern artistry. Our collection combines innovative designs with high-quality materials, creating structures that are both functional and visually stunning. Build with style, strength, and sophistication.