Shop
Laticrete 254 platinum
Price range: 59,00 د.إ through 65,00 د.إ (incl. VAT)254 PLATINUM is the ultimate one-step, polymer fortified,
thin-set mortar for interior and exterior installation of
ceramic tile, porcelain tile, thin porcelain tile, stone, quarry
tile, pavers and thin brick. 254 PLATINUM, designed to
just mix with water, has a long open time (E) with
unsurpassed adhesion, workability, deformability (S1),
and minimal vertical slip (T)
Technical Date Sheet
HYDRO BAN
250,00 د.إ (incl. VAT)HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.
Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
TDS
Lata Screed PM 30
17,50 د.إ (incl. VAT)LATASCREED PM-30 ready to use screeding mix, blend of carefully selected raw materials, Portland cement, polymer, fibers, and graded fillers. When mixed with water produces quality screed with controlled shrinkage and high mechanical strength ready for early installation. The screed follows the code of practice of BS 8204-1:2003 and EN 13813:2002.
Technical Date Sheet
Plaster Mix M
18,00 د.إ (incl. VAT)Plaster Mix M is a cement-based plastering material composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive mortar. Plaster Mix M is a high-quality product that contains a special shrinkage control additive. It is designed for manual hand application for areas that can not be accessed by machine application. Plaster Mix M can be used by plaster spray machines too. Plaster Mix M is generally applied in thicknesses ranging from 5 to 20mm per layer
Technical Data Sheet
weberpremix SP-11
23,00 د.إ (incl. VAT)weberpremix SP-11 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability, bonding and curing. weberpremix SP-11 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up. weberpremix SP-11 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. For the application on Light Weight concrete blocks, it is recommended to use weberpremix SP-3 FL or weberpremix SP-33.
Technical Date Sheet
Vetoset CA540 (20 KG)
Price range: 31,00 د.إ through 35,00 د.إ (incl. VAT)Vetoset CA540 is a cement based professional grade highly deformable tile adhesive that works with most types of tiles and flexible substrates. The product is composed of a blend of cements, carefully selected aggregates, special additives and polymers that provide Vetoset CA540 with its uniqe properties. The product is suitable for internal as well as external use.
Technical Data Sheet
webercol Flex Kit (19.565Kg)
65,00 د.إ (incl. VAT)Webercol flex is a two-component cement-based polymer
modified, flexible, waterproof tile adhesive for internal &
external use. It is a ready mix powder containing cement,
siliceous sand and additives.
Webercol flex has outstanding qualities such as high bonding
strength, high resistance to water and chemicals, water
tightness and flexibility.
It is used internally and externally with a wide range of small
to large tiles, and in cases of permanent exposure to high
degrees of humidity.
Technical Date Sheet
LATAPOXY 300 Adhesive
230,00 د.إ (incl. VAT)LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive
that will bond to most sound, clean surfaces. Adhesive spreads
easily and cleans with water while fresh. LATAPOXY 300 Adhesive is
a factory-proportioned kit consisting of epoxy resin, hardener and
chemical resistant silica filler. LATAPOXY 300 Adhesive can be used
in interior and exterior (see limitations) walls and floors, wet and dry
areas.
Technical Date Sheet
Laticrete Level 3 to 40
63,00 د.إ (incl. VAT)LEVEL is a cement-based easy-to-use, self-leveling underlayment designed for use over various substrates including concrete and ceramic tile. LEVEL provides a smooth and flat surface on which finished floor goods can be installed. LEVEL can be placed from 3–40 mm in a single lift
Technical Date Sheet
weberpremix Src-S (50Kg)
Original price was: 33,00 د.إ.32,00 د.إCurrent price is: 32,00 د.إ. (incl. VAT)Weberpremix SRC-S is a ready mixed mortar based on mineral
bonding agent used for preparing surfaces before the rendering. It improves the adhesion of the new plaster, cement or
gypsum based. It is applied on smooth very dense concrete
and concrete containing SCMs (GGBS, SilIca fume, Fly ash,
Metakaolin
Technical Date Sheet
Weberbloc Fix Lw (50 Kg)
20,00 د.إ (incl. VAT)weberbloc fix LW is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, bonding and water retention. weberbloc fix LW is particularly adapted for mounting light weight blocks.
Technical Date Sheet
Aggregate
Price range: 255,00 د.إ through 260,00 د.إ (incl. VAT)In the UAE, construction aggregate sourcing relies heavily on the northern emirates—particularly the mountains of Fujairah and Ras Al Khaimah (RAK). Materials such as Gabbro, Basalt, and Limestone are quarried and crushed into various size
Aggregate is made from crushing the stones from the mountains using specific methods , technique and machinery to convert them in size like 3″8″- 4″8″ and so on depending on the demand
3701 Fortified Mortar
16,00 د.إ (incl. VAT)3701 Fortified Mortar is a polymer fortified blend of carefully selected
polymers, portland cement and graded aggregates. 3701 Fortified
Mortar does not require the use of latex admix, you only need to add
water to produce thick bed mortar with exceptional strength. 3701
Fortified Mortar is an approved substitute for 226 Thick Bed Mortar
mixed with 3701 Mortar Admix.
TDS
Penetrating UltraCare
450,00 د.إ (incl. VAT)Penetrating sealer for interior and exterior applications
TDS
Laticrete 305 (25 Kg)
Price range: 19,00 د.إ through 20,00 د.إ (incl. VAT)Laticrete 305 is a cement based adhesive with excellent
workability, designed for installation of interior wall and
floor tile using the thin-bed application method.
TDS
Laticrete Bond (20 KG)
Price range: 13,80 د.إ through 14,80 د.إ (incl. VAT)A polymer modified tile and stone adhesive that can be
used for both thin bed and Large Heavy Tile applications.
Designed to be used alone or mixed with one of three
optional LATICRETE SELECT-BOND Adhesive System
Kits for additional performance enhancements – NonSag, Rapid and High Performance ( ANSI A118.15) . See
individual product data sheets for each SELECT-BOND
Adhesive System Kit.
When used alone (without an additional Adhesive System
Kit) LATICRETE SELECT-BOND provides a one-step
installation for ceramic tile, porcelain tile, marble and
stone on floors and walls. Approved for use over exterior
glue plywood for interior installations.
Technical Date Sheet
Online store with a wide selection of Building material.
Discover a vast selection of high-quality building materials at unbeatable prices. From foundation to finishing touches, we have everything you need for your construction or renovation projects. Shop with ease, enjoy fast delivery, and build with confidence.
Building material with a modern form of art
Transform your spaces with building materials that blend durability with modern artistry. Our collection combines innovative designs with high-quality materials, creating structures that are both functional and visually stunning. Build with style, strength, and sophistication.