MAPESET (25 KG)
Price range: 15,00 د.إ through 21,50 د.إ (incl. VAT)Cement-based adhesive for tiles.
Applications: Internal and external bonding of ceramic tiles and mosaics, single-fired and double-fired tiles for floors, walls and ceilings.
Technical data:
Pot life: 6-8 hours.
Open time: > 20 minutes.
Set to light foot traffic: approx. 24 hours.
Colours: grey and white.
Application: notched trowel n. 4 or 5 or 6.
EMICODE: EC1 R PLUS – extremely low emission level.
Storage: 12 months.
Consumption: 2-5 kg/m2.
Packaging: 25 kg bags.
TDS
KESRASET-25 KG
Price range: 15,00 د.إ through 22,00 د.إ (incl. VAT)Internal walls and Doors, and external Doors bonding of ceramic tiles and mosaics, tile on tile application, vitrified tiles, single-red and double-red tiles.
Bonding of ceramic mosaics on paper or mesh, absorbent single-red or double-red ceramic tiles on: • traditional render or cement mortar; • ordinary or floating reinforced, cementitious screeds provided they are sufficiently cured and dry.
RECOMMENDATIONS
Do not use Keraset:
on wood and wooden mixtures; • on gypsum board or lightweight concrete walls; • on metal, rubber, PVC, and linoleum surfaces; • for the installation of glass mosaics; • for the installation of tiles that require an adhesive thickness greater than 10 mm; • with large size tiles;
Technical Data Sheet
KERABOND T
Price range: 19,00 د.إ through 28,00 د.إ (incl. VAT)For interior fixing of ceramic tiles and ceramic mosaics,
double-fired or single-fired on floors and walls on
cementitious substrates or gypsum substrates (for the
latter with prior application of a suitable primer).
Some application examples
For fixing paper faced or mesh backed ceramic
mosaics and absorbent double-fired or single-fired
ceramic tiles on:
• cement-rendered walls;
• brick walls;
• cementitious based screeds, sufficiently dry and
cured.
TDS
MAPEGROUT ME05
Original price was: 28,00 د.إ.25,00 د.إCurrent price is: 25,00 د.إ. (incl. VAT)High performance, shrinkage compensated, high-flow micro-concrete and thick section grout
Technical Date Sheet
MAPEGROUT T60
28,00 د.إ (incl. VAT)Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete.
Use Mapegrout T60 to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Mapegrout T60 is also recommended for repair work in tunnels, canals and water works in general.
Mapegrout T60, mixed with about 17% water, and 0.25 of Mapecure SRA?forms a very workable mortar with a thixotropic consistency that is easily applied on vertical surfaces without shuttering.
The product may be used without adding Mapecure SRA, when environmental conditions permit excellent curing.
Mapegrout T60 is applied by trowel, float or sprayer onto damp substrates that are sound, rough and free of loose particles, and been saturated with water beforehand.
Repairs up to 40 mm thick in a single coat can be made.
Mapegrout T60 meets the minimum requirements of EN 1504-3 standards for R4-class structural mortar.
Consumption
18.5 kg/m2 per cm of thickness.
Packaging
25 kg bags.
TDS
TOPCEM PRONTO
Original price was: 30,00 د.إ.28,00 د.إCurrent price is: 28,00 د.إ. (incl. VAT)Ready-mixed mortar with high thermal conductivity, ideal for heated screeds.
ADVANTAGES:
- High thermal conductivity, ideal for heated screeds
- Ready to use
- Rapid-drying
- High mechanical strength
- Negligible hygrometric shrinkage
Technnical Date Sheet
MAPESIL AC
Original price was: 35,00 د.إ.32,00 د.إCurrent price is: 32,00 د.إ. (incl. VAT)ADVANTAGES:
- High elasticity
- Mould-resistant (BioBlock® technology)
- Solvent-free
- Strong and durable
- Maximum guarantee
- Perfect adhesion
- Smooth and elastic
- High thermal and chemical resistance
- Excellent durability
- Wide range of colours
TECHNICAL DATA:
Movement in service: 25%.
Modulus of elasticity at 100% elongation: 0.35 N/mm².
Shore A hardness: 20.
Workability time: 10 minutes.
Colours: 34 colours + transparent.
EMICODE: EC1 Plus – very low emission.
Application: extrusion gun.
Consumption: 3.1 linear metres per 310 ml cartridge (10×10 mm section).
Packaging: 310 ml cartridges.
.
TDS
ADESILEX P7
Price range: 32,50 د.إ through 41,00 د.إ (incl. VAT)ADESILEX P7 is a High performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles.
WHERE TO USE
Interior and exterior bonding of ceramic tiles, porcelain and mosaics on floors, walls and ceilings. Also suitable for spot bonding of insulating materials such as expanded polystyrene, rock and glass wool, Eraclit®
(wood-cement panels), sound-deadening panels, etc.
PACKAGING
Adesilex P7 white and grey are available in 25 kg bags.
STORAGE
Adesilex P7 can be stored 12 months in a normal environment in original packaging.
Technical Date Sheet
MAPEGROUT ME06
Original price was: 37,00 د.إ.35,00 د.إCurrent price is: 35,00 د.إ.BAG (incl. VAT)High strength, shrinkage compensated, super-flow micro-concrete.
Mapegrout ME 06 is used for structural repair where particular thickness and state of deterioration requires the use of high flow concrete and for, grouting of gaps with thickness ranging from 30-250mm.
Mixing ratio – One 25 kg of Mapegrout ME 06 with 3.1-3.4 litres of water.
Yield: 12.3 liters / 25 kg.
Packaging: 25 kg bags
Technical Date Sheet
ADESILEX P9
Price range: 40,00 د.إ through 50,00 د.إ (incl. VAT)ADVANTAGES:
- Versatile
- Non-slip properties on vertical surfaces
- Extra white
- Excellent price/quality ratio
TECHNICAL DATA:
Pot life of mix: over 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Colours: off-white.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months
Packaging: 20kg bags
Technical Date Sheet
Mapei KERAFLEX
Price range: 50,00 د.إ through 55,00 د.إ (incl. VAT)BENEFIT:
- Excellent workability
- Perfect adhesion to all materials
- Low emission level of VOC
- Extended open time
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-6 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Colours: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months (25 kg bags), 24 months (5 kg bags).
Consumption: 2-5 kg/m².
Packaging: 25 kg bags and 4×5 kg Alupack boxes.
Technical Date Sheet
QUARZO
Price range: 50,00 د.إ through 52,00 د.إ (incl. VAT)
ULTRAPLAN ECO 20
Original price was: 585,00 د.إ.58,00 د.إCurrent price is: 58,00 د.إ. (incl. VAT)Rapid hydrating, fast-drying self-levelling compound.
WHERE TO USE
Ultraplan Eco 20 is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive flooring where a high resistance to loads and traffic is required.
Ultraplan Eco 20 is for interior use only. Typical applications would include use in hospitals, hotels, theatres, schools and shopping centres.
Technical Date Sheet
KERAFLEX MAXI S1
Price range: 66,50 د.إ through 75,00 د.إ (incl. VAT)High-performance polymer modified cementitious adhesive.
Advantages:
- No vertical slip
- Extended open time
- High performance
- Suitable for laying large porcelain and natural stone tiles.
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S1 – deformable.
Colours: white and grey.
Application: N° 4, 5, 6 or 10 notched trowel.
Storage: 12 months.
Consumption: 1.2 kg/m ² per mm of thickness.
Packaging:
– grey: 25 kg bags;
– white: 25kg bags.
Technical Date Sheet
ULTRACOLOR PLUS
Original price was: 84,00 د.إ.75,00 د.إCurrent price is: 75,00 د.إ. (incl. VAT)High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints up to 20 mm wide, with very low emission of volatile organic compounds and offset Greenhouse Gas Emissions
Technical Date Sheet
MAPEI Ultralite S2 (11.3KG)
Price range: 77,00 د.إ through 88,00 د.إ25 KG (incl. VAT)Premium, Highly Deformable, Lightweight, Gauged-Tile Mortar with Polymer
MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.
TDS