MAPEPROOF SWELL
Original price was: 85,00 د.إ.84,00 د.إCurrent price is: 84,00 د.إ. (incl. VAT)Single component hydro-expansive paste supplied in cartridges, used to waterproof and seal cracks in concrete.
Where to use:
Mapeproof Swell has been specially developed to form flexible, waterproof seals in cracked reinforced concrete or in prefabricated elements with infiltration of water.
Some application examples:
-
Sealing pipe-work which passes through concrete.
-
Sealing spacers in formwork.
-
Sealing cold joints in reinforced concrete structures.
-
Sealing where water seeps through cracks in reinforced concrete structures.
-
Bonding various types of joints.
-
Sealing lights and drainage outlets in swimming pools and tanks.
-
Sealing construction joints in concrete walls.
Packaging: Boxes containing 6 cartridges, each one containing 320 ml.
TDS
ULTRAPLAN ECO
Original price was: 88,00 د.إ.85,00 د.إCurrent price is: 85,00 د.إ. (incl. VAT)Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.
Workability time: 20-30 minutes.
Thickness applied: from 1 to 10 mm.
Set to light foot traffic: approx. 3 hours.
Waiting time before laying: 12 hours for ceramic tiles, natural stone and resilient coverings, 24 hours for wood.
Application: trowel, rake or pump.
EMICODE: EC1 R Plus – very low emission.
Colour: pinky grey.
Storage: 12 months.
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
Technical Date Sheet
ADESILEX P10 -25 KG
Original price was: 90,00 د.إ.89,50 د.إCurrent price is: 89,50 د.إ. (incl. VAT)Adesilex P10 is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E) classified as C2TE.
Adesilex P10 is a high-performance cementitious adhesive for use with ceramic, mosaic, and stone tiles
Interior and exterior floor and wall bonding of: ▪ installation of normal or heavy weight mesh-backed or paper-faced glass, ceramic, vitrified and marble mosaic. ▪ installation of ceramic, vitrified tiles, and natural stone.
Some application examples Adesilex P10: ▪ Bonding of ceramic, vitrified, glass, and marble mosaic on cementitious renders, from the top towards the bottom. ▪ Bonding mosaic on non-planar substrates, without tiles, slipping. ▪ Bonding mosaic on gypsum board panels. Adesilex P10 mixed with Isolastic diluted 1:1 with water: ▪ Bonding mosaic in swimming pools on renders or on substrates waterproofed with Mapelastic. ▪ Internal bonding of mosaic on existing ceramic and vitrified tiles. ▪ Bonding small sized ceramic and vitrified tiles on renders in swimming pools.
Technical Date Sheet
PLANICRETE
Price range: 90,00 د.إ through 390,00 د.إ (incl. VAT)Applications:
Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive for cement based adhesive slurries for anchoring bonded screeds, filling holes or repairing damaged sections of screeds, cementitious floors, etc. Additive for spatterdash to provide anchoring for renders. Do not use pure Planicrete as a primer or slurry, always mix it with Portland cement, or when required, with Mapecem, Mapecem Pronto, Topcem or Topcem Pronto.
Technical data:
Storage: 24 months. Protect from frost.
Consumption
depends on dilution and thickness of mortar.
Packaging
25 – 10 – 5 kg drums and 12×1 kg packs.
TDS
PRIMER G
Price range: 90,00 د.إ through 390,00 د.إ (incl. VAT)PRIMER G
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 – extremely low emission level.
Storage: 12 months. Protect from frost.
0.1-0.2 kg/m2 depending on use.Packaging
25-10-5 kg drums and 12×1 kg packs.
Technical Data Sheet
ULTRATOP LOFT F -5 kg
98,50 د.إ (incl. VAT)Ultratop Loft F is the ideal coating product to create decorative internal floors and walls with a marked meteoric effect. Thanks to its ease of use, versatility and resistance to abrasion, this formulate is ideal for creating floors subjected to intense pedestrian traffic in areas such as bars, shops, restaurants, hotel lobbies, private homes, cafes, hotels and showrooms, and generally in all areas relating to interior decorating in the civil building sector. The consistency of the product and limited thickness of the coat applied, and the possibility of applying it on vertical surfaces and combining it with a wide range of colors, allows an infinite variety of original and unique coatings to be created.
Technical Date Sheet
ULTRATOP LOFT W -5 kg
103,00 د.إ (incl. VAT)DESCRIPTION
Ultratop Loft W is a one-component, cement-based decorative topping
that is troweled and applied in two layers 1/16″ (1.5 mm) in thickness. It is
specially formulated for abrasion resistance in designing non-uniform and
non-homogeneous finishes with a broad range of finishing effects on indoor
decorative surfaces. Ultratop Loft W [NA] can be used on a wide variety of
substrates and combines excellent versatility with easy application.
FEATURES AND BENEFITS
• Available in white or natural color, and can be colored with Ultratop
Easycolor [NA]
• Easy to mix with clean water or Ultratop Easy color [NA] for a broad range
of hues
• Easy to apply with a flat-edge metal trowel
• One-component, cement-based micro-topping for a wide variety of
substrates
• Trowel-applied in two thin layers for faster installation
• Specially formulated for new floors and walls; suitable for refurbishing old
floors and walls
• Hardens within 6 to 8 hours and is ready to accept sealers or coatings within
24 hours
• Can be used in interior, occupied environments
WHERE TO USE
Ultratop Loft W [NA] was developed to provide durable yet visually pleasing
horizontal and vertical surfaces for residential and commercial spaces.
Technical Date Sheet
PLANITOP FAST 330
Original price was: 115,00 د.إ.110,00 د.إCurrent price is: 110,00 د.إ.BAG (incl. VAT)Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
TDS
ISOLASTIC
Price range: 110,00 د.إ through 499,00 د.إ (incl. VAT)ADVANTAGES:
- Very fluid
- Improves adhesion
- Improves deformability
- Suitable for interior and exterior bonding
TECHNICAL DATA
Mixed with Kerabond Plus:
Pot life: over 8 hours.
Open time: 30 minutes.
Grouting:
– walls: 4-8 hours
– floors: 24-36 hours
Set to light foot traffic: 24-36 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12002: S2 – highly deformable
Application: Kerabond Plus: notched trowel n. 4 or 5 or 6.
Storage: 24 months. Protect from frost.
Consumption: 1-2 kg/m2.
Packaging: 6.6kg and 25kg drums
Technial Date Sheet
ULTRAPLAN
Original price was: 118,00 د.إ.115,00 د.إCurrent price is: 115,00 د.إ. (incl. VAT)Ultra-fast drying self-levelling smoothing compound, for thicknesses from 1 to 10 mm per coat
ADVANTAGES:
- Application thickness from 1-10 mm per coat
- Application up to 20 mm if blended with quartz
- Suitable for hand or pump application
- Excellent self-levelling properties
- Excellent surface finish
- High bonding strength to the substrate
- High compressive and flexural strenght
- High abrasion resistance
- Ultra-quick hardening
- Lay ceramic after 3 hours and resilient and wood after 12 hours
- Exposure to castor wheels in accordance with EN 12529
- EMICODE EC1 Plus (very low emissions)
- Blauer Engel – DE – UZ 113
TDS
ULTRALITE S1
120,00 د.إ (incl. VAT)One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic tiles and stone material.
Conformity of Ultralite S1 is declared in ITT certificates n° 25080237/Gi and n° 25110057/AG (TUM) issued by the Technische Universität München laboratory (Germany)
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: > 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S1 – deformable.
Colour: grey and white.
Application: N° 4, 5, 6 or 10 notched trowel.
EMICODE: EC1 R Plus – very low emission.
Storage: 12 months.
Consumption: 1.5-2.5 kg/m².
Packaging: 15 kg bags.
Technical Date Sheet
Mapegrout Rapid
Original price was: 130,00 د.إ.125,00 د.إCurrent price is: 125,00 د.إ. (incl. VAT)Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
Where to use:
Fine-grained, natural-finish skimming layer for internal and external concrete, cementitious and lime-mortar render, old quartz paint, scratch-effect plastic coatings and glass or porcelain mosaics.
Application examples:
Levelling and finishing concrete walls, cementitious renders or cement lime mortar before painting.
- Smoothing walls, even over existing paint such as washable acrylic paints, quartz paints, textured paints, etc. as long as they are sound, clean and well anchored.
- Smoothing over glass or porcelain mosaics on walls.
- Smoothing gypsum wall-board panels (treated beforehand with Primer G).
- Smoothing mineral wood panels (such as Eraclit).
Packaging: 25 kg bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.4 mm.
Packaging: 25 kg bags.
TDS
MAPELASTIC EASY
130,00 د.إ (incl. VAT)Two-component acrylic modified cementitious, flexible waterproof coating easy to apply for waterproofing balconies, terraces, and bathrooms.PACKAGING: Mapelastic Easy available in 24 kg kits.
- Component A: 18 kg bags
- Component B: 6 kg jerrycans
STORAGE: Mapelastic Easy component A may be stored for up to 12 months when contained in its original sealed packaging in a dry place. Mapelastic Easy component B may be stored for up to 24 months. Store Mapelastic Easy in a dry place and at a temperature of at least +5°C.
Technical Date Sheet
ADESILEX PG2 TG – 6 kg
Original price was: 180,00 د.إ.178,00 د.إCurrent price is: 178,00 د.إ. (incl. VAT)
KERAPOXY
Price range: 195,00 د.إ through 355,00 د.إ (incl. VAT)ADVANTAGES:
- Excellent resistance to chemicals
- High hygiene, HACCP compliant
- High mechanical strength
- Waterproof and hygienic grouts
- Uniform colour that remains stable over the years
- Very low emission of VOC
Technical Date Sheet
Eco Prime Grip Plus -10 KG
Original price was: 215,00 د.إ.205,00 د.إCurrent price is: 205,00 د.إ.drum (incl. VAT)WHERE TO USE
Multi-purpose, ready-to-use primer for internal and
external floors and walls.
Eco Prim Grip Plus may be used to improve
the bond of cement and lime-based plasters on
substrates made from concrete, brickwork, vibrocompressed concrete blocks.
Eco Prim Grip Plus is also suitable for improving
the bond of adhesives for ceramics, smoothing and
levelling compounds on non-absorbent surfaces,
such as ceramic, terrazzo and natural stone floors.
Some application examples
• Application of render on concrete, brickwork,
substrates, etc.
• Application of smoothing and levelling compounds
on old ceramic, terrazzo and natural stone floors.
• Laying ceramic and natural stone floors directly
on top of old ceramic floors