Showing 1–16 of 30 resultsSorted by average rating
Weberfloor Rapid (50 kg)
Original price was: 20,00 د.إ.18,99 د.إCurrent price is: 18,99 د.إ. (incl. VAT)weberfloor rapid is a rapid drying, ready to use polymer modified hydraulic binder, shrinkage controlled semi-dry floor screed. Comparing to the traditional semi-dry screed, this premixed screed is the best solution for use in all instances where logistics conditions at sites are complicated. Additionally, it improves the quality, strength and drying speed of the screed over standard cement screeds.
Technical Date Sheet
Webertec 301 pc- 25 Kg
Original price was: 21,00 د.إ.19,00 د.إCurrent price is: 19,00 د.إ. (incl. VAT)Cementitious non-shrink precision grout
- Easy to apply
- High strength
- Flowable
- Surface of application
Wall, Roof, Floor
Technical Date Sheet
Weberpox easy (4 kg)
Original price was: 89,00 د.إ.87,00 د.إCurrent price is: 87,00 د.إ. (incl. VAT)Weberepox easy is a 100% reactive two components epoxy
tile adhesive and tile grout product with very easy water
cleanable properties exceeding the requirement of the
standard ANSI 118.3, excellent chemical resistance, high
strength, and easy application. It is designed for numerous
application needs. In addition to its waterproofing and
excellent workability properties,
Technical Data Sheet
Weberfloor 535 FD (25kg)
78,00 د.إ (incl. VAT)Weberfloor 535 FD is a fast drying, low shrinkage and self
leveling cementitious underlayment flooring compound.
Weberfloor 535 FD is to be used internally for smoothing and
levelling differences in thicknesses from 2 to 30 mm, on new
or existing substrates. Weberfloor 535 FD has fast covering
property which can receive all kinds of flooring covering at
24 hours from the application. It has good loads and
abrasion resistance which enables the material to be used in
areas subject to whirl activity that can result from trolleys
and chairs. It provides a fast setting tough surface that will
accept light traffic after 3-4
Technical Date Sheet
Weberfloor Smoth FD
Original price was: 55,00 د.إ.52,00 د.إCurrent price is: 52,00 د.إ. (incl. VAT)Weberfloor smooth FD is a fine smoothing, and low shrinkage
flooring leveling compound with fast drying property
allowing fast covering with different type of floor finishes
between 12 – 48 hours. Weberfloor smooth FD is to be used
internally for smoothing and levelling differences in
thicknesses from 1 to 10 mm, on new or existing substrates
that can receive all kinds of flooring covering. It has good
loads and abrasion resistance which enables the material to
be used in areas subject to whirl activity that can result from
trolleys and chairs. It provides a fast setting tough surface
that will accept light traffic at 3-4 hours depending on the
thickness and site conditions.
Technical Date Sheet
Weberdry 116 FX (18 KG)
Price range: 58,00 د.إ through 71,00 د.إ (incl. VAT)weberdry 116 FX is a cement based two component polymer
modified waterproofing slurry, available in grey and white.
It is applied to concrete and mortar structures to prevent water
infiltration. Protection and waterproofing of concrete surfaces
and facades.
weberdry 116 FX must be used on damp cement based
substrate.
Technical Date Sheet
WEBERCOL PRO (25 KG)
Price range: 19,50 د.إ through 21,40 د.إ (incl. VAT)Webercol Pro is water resistant and can be used for fixing a
wide range of tiles (ceramic, sandstone, marble, porcelain,
etc.) on the following substrates:
• Concrete walls
• Cementitious plasters and renders
• Screed/concrete floors
Technical Date Sheet
webercol Premium (25 Kg)
Price range: 61,00 د.إ through 64,00 د.إ (incl. VAT)Webercol premium is a high performance cement-based
polymer modified adhesive for fixing all types of tiles and
stones onto interior and exterior floors and walls. Webercol
premium has very strong bonding in wet areas. It is suitable
to fix tiles on low porosity substrates such as power floated
concrete.
Webercol premium exceeds standard requirements EN12004
and is classified as C2TE. werbercol Premium is non-sagging
and slip resistance “T” with ability to perform in extended
open time conditions “E”.
Technical Date Sheet
WeberCol Fix (20 KG)
Price range: 13,00 د.إ through 16,50 د.إ (incl. VAT)webercol fix is a ready-mix cement-based tile adhesive for
internal use. col fix is polymer modified and water resistant
with a strong bonding effect.
Technical Date Sheet
Weberpremix SP-33 (50 kg)
Original price was: 23,00 د.إ.20,00 د.إCurrent price is: 20,00 د.إ. (incl. VAT)weberpremix SP-33 is a fiber reinforced cement-lime ready
mix plaster used for traditional plastering works in a clean
and speedy manner, while keeping a homogeneous mix. Due
to its high content in fibers and additives, it allows better
shrinkage control as well as improved workability, curing
and impermeability. weberpremix SP-33 is a special product
dedicated for light weight blocks (Autoclaved Aerated
Concrete Blocks) that can be applied for external and internal
plastering without any rush coat. It can also be used for normal
masonry blocks without rush coat. weberpremix SP-33 can
be applied on concrete provided that a suitable rush coat is
applied before (weberpremix SRC-2 or weberpremix SRC-S).
weberpremix SP-33 can be applied traditionally by hand or by
using modern plaster-spraying machines. It should not be used
on painted surfaces or floors.
weberpremix SP-33 includes all the features of the weberpremix
SP-11, that makes it a perfect solution for all substrates
Technical Date Sheet
WEBERCOL PLUS (25KG)
Price range: 26,99 د.إ through 30,99 د.إ (incl. VAT)webercol plus is a ready mix cement-based high
performance polymer “latex” modified tile adhesive for
internal and external use. col plus has a strong bonding
effect, used for adhering large tiles, or in cases of permanent
exposure to high degrees of humidity. It can be used in a
damp environment, and is water resistant. col plus is
non-sagging and classified “T” (slip resistant) according to EN
12004 for tile adhesives
Technical Date Sheet
WeberTec MC 1
Original price was: 23,00 د.إ.20,90 د.إCurrent price is: 20,90 د.إ. (incl. VAT)webertec MC1 is a durable mono-component micro concrete
made of selected sand and aggregates, special cement,
green binders and additives. Its special formulation, flowable
consitency and convenient packaging makes it easy to mix and
to place in congested areas.
webertec MC1 is recommended where high compressive
strength, high thicknesses and durability are required.
webertec MC1 is specially formulated to produce a shrinkage
compensating micro concrete that can be applied in
thicknesses ranging from 30mm to 200mm per layer although
greater thickness up to 300mm can be practiced depending
on the design of the repair job and level of steel reinforcement.
Technical Date Sheet
Webertec 301- 25 Kg
Original price was: 26,00 د.إ.24,20 د.إCurrent price is: 24,20 د.إ. (incl. VAT)Non shrink structural grout
Technical Date Sheet
Weberbloc Fix N (50 Kg)
Original price was: 18,00 د.إ.16,50 د.إCurrent price is: 16,50 د.إ. (incl. VAT)Block and brick laying mortar
weberbloc fix N is a ready mix mortar that requires only the addition of water. It is made of cement, graded sand and additives for improved workability, better bonding and water retention.weberbloc fix N is available with and without lime. weberbloc fix N is particularly adapted for mounting regular/hollow blocks, stones, and bricks and to fill gaps between concrete and bricks.
Technical Date Sheet
Weber Dry 360 PU
470,00 د.إdrum (incl. VAT)Weber Dry 3600 PU is Liquid applied polyurethane waterproofing membrane-UV Resistant
Weber Dry 3600 PU is a 1-component liquid applied membrane
made of polyurethane specially designed for waterproofing.
Its outstanding performances allow protection and
waterproofing of many areas such as:
• Water supply channel
• Water storage tanks
• Flowerbeds and fountains
• Rooftops
• Crack bridging
• Under-tile wet areas (pools, bathrooms, balconies, terraces…)
When applied, weberdry 360 PU creates a continuous
watertight seal. It allows moisture vapor transmission. It has
also excellent adhesion to almost any surface: concrete,
metal, bitumen membranes, acrylic paints… It keeps
outstanding performances for a very long period. Weber Dry 3600 PU is applicable by brush, roller or spray gun. For best
results, the temperature during application and cure should
be between 5°C and 35°C. Low temperatures retard cure
while high temperature speed up curing.
Technical Data Sheet
Weberdry 110 FX (24.8Kg)
Price range: 250,00 د.إ through 265,00 د.إ (incl. VAT)weberdry 110 FX is a two component polymer modified cementitious coating: Powder made of cements, fillers and admixtures. Liquid based on resins and additives. It is available in Grey and White . weberdry 110 FX cures to form an elastomeric, waterproof, flexible and resistant membrane, suitable for use in potable water tanks, reservoirs, canals and tunnels.