webertec 311 MC
Original price was: 22,00 د.إ.21,00 د.إCurrent price is: 21,00 د.إ.webertec 311 MC is a ready-to-use micro concrete made of selected sand and aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 311 MC is specially formulated to produce a shrinkage compensating micro concrete with high performance. webertec 311 MC can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.
Technical Date Sheet
Weber Joint Grout
18,00 د.إHigh-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints up to 20 mm wide, with very low emission of volatile organic compounds and offset Greenhouse Gas Emissions
Technical Date Sheet
Video
Weberdry 136 FX (22.5Kg)
Price range: 130,00 د.إ through 140,00 د.إweberdry 136 FX is a two-component cement latex modified elastomeric waterproofing coating used as a waterproof lining over masonry and concrete. weberdry 136 FX is composed of a cement mortar with additives, and of a liquid component. Mixed together on site, the product is easy to apply and is used as an effective protection coating on walls against: water-borne salts (chlorides, sulfates), wear, weather and chemicals, atmospheric gases and carbonation, from rusting of steel reinforcements. It is a non shrink , non-flammable mortar . weberdry 136 FX is available in white and grey colors. For other colors, contact Company’s Technical Department.
Technical Data Sheet
Biflex SL 4mm-180 (10m2)
145,00 د.إA high performance elastomeric waterproofing membrane which combines the ability to withstand high ambient temperature with the usual characteristics of an SBS membrane of high flexibility at low temperature that makes it easy to apply at sub-zero temperature.
Technical Date Sheet
Weberep 331 Tx (25 Kg)
Original price was: 24,00 د.إ.23,00 د.إCurrent price is: 23,00 د.إ.weberep 331 TX is a ready-to-use mortar mainly made of sand (reconstituted grain size range), special cement, fibers and special additives that provide special properties: non-shrinking, thixotropic, high strength, high adhesion, compactness; its closed porosity slows down carbonation.
Technical Date Sheet
Weberep Epo 420 SC Kit (27.8 Kg)
215,00 د.إweberep epo 420 SC is a three- component system based on epoxy resins and selected fillers. It provides a resilient system for floor repairs and resurfacing, non absorbent and dust free. The selected fillers enable the system to hold thickness and give weberep epo 420 SC a high resistance to abrasion, as well as a high tensile and compressive strength.
Technical Date Sheet
Weberep 360 FFR (20 Kg)
Original price was: 32,00 د.إ.31,00 د.إCurrent price is: 31,00 د.إ.Weberep 360 FFR is a dry pre-mixed polymer-modified
cementitious coating based on hydraulic binders, siliceous
filler, water retaining agents and other admixtures. Weberep
360 FFR is available in white and light-grey.
Technical Date Sheet
Weberep 332 FR (25 Kg)
26,00 د.إWeberep 332 FR is a ready-to-use mortar composed of silica
sand (reconstituted grain size range), special cement, microsilica,
fibers, and additives that provide specific properties: non
shrinking, thixotropic, high strength, high adhesion, and
compactness. The highly compacted grains slows down
carbonation.
Technical Date Sheet
weberpremix SP-11
23,00 د.إweberpremix SP-11 is a cementitious fibre reinforced ready mix plaster used for traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its high content in additives, it allows better shrinkage control as well as improved workability, bonding and curing. weberpremix SP-11 is recommended for external and internal plastering on block walls, ceilings, concrete surfaces, bricks and for general filling up. weberpremix SP-11 can be applied traditionally by hand or by using modern plaster-spraying machines. It should not be used on painted surfaces or floors. For the application on Light Weight concrete blocks, it is recommended to use weberpremix SP-3 FL or weberpremix SP-33.
Technical Date Sheet
webercol Flex Kit (19.565Kg)
65,00 د.إWebercol flex is a two-component cement-based polymer
modified, flexible, waterproof tile adhesive for internal &
external use. It is a ready mix powder containing cement,
siliceous sand and additives.
Webercol flex has outstanding qualities such as high bonding
strength, high resistance to water and chemicals, water
tightness and flexibility.
It is used internally and externally with a wide range of small
to large tiles, and in cases of permanent exposure to high
degrees of humidity.