Filter by price
Color
Product Status
Showing 1–16 of 17 resultsSorted by average rating
Webertec 301 pc- 25 Kg
Cementitious non-shrink precision grout
- Easy to apply
- High strength
- Flowable
- Surface of application
Wall, Roof, Floor
Technical Date SheetÂ
WeberTec MC 1
webertec MC1 is a durable mono-component micro concrete
made of selected sand and aggregates, special cement,
green binders and additives. Its special formulation, flowable
consitency and convenient packaging makes it easy to mix and
to place in congested areas.
webertec MC1 is recommended where high compressive
strength, high thicknesses and durability are required.
webertec MC1 is specially formulated to produce a shrinkage
compensating micro concrete that can be applied in
thicknesses ranging from 30mm to 200mm per layer although
greater thickness up to 300mm can be practiced depending
on the design of the repair job and level of steel reinforcement.
Technical Date SheetÂ
Vetonit Putty WR 25 kg
Vetonit Putty WR
Water-resistant, high-quality, & cementitious premixed Putty (Stucco).
Vetonit Putty WR is composed of white cement, fine fillers, bonding chemicals, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, requiring only the addition of clean water to produce a cohesive mix. Vetonit Putty WR is a premium product and can be applied as a thin underlayment to repair undulations. It provides a fine surface finish that is ideal for subsequent applications of paint or decorative coatings. It is recommended to apply a thin layer of Vetonit Putty WR (1 – 3 mm).
Technical Date SheetÂ
Webertec 301- 25 Kg
Non shrink structural grout
Technical Date SheetÂ
ADESILEX PG2 TG – 6 kg
Eco Prim T Plus
Universal acrylic primer for all types of absorbent and non-absorbent substrates
ADVANTAGES:
- Universal primer
- May be diluted up to 1:4 with water according to area of use
- Easy to apply with a brush or roller
- Suitable for use on epoxy or polyurethane waterproofing primers
- Adhesion promoter
- Insulator between gypsum and concrete
- Dust fixative
- Absorption regulator
- For floors and walls
- EMICODE EC1 PLUS – Very low emission of volatile organic compounds (VOC)
- Blauer Engel – DE – UZ 113
- Consumption 30-150 g/m2
- Drying time 0-60 minutes according to area of use
Techncial Date Sheet Â
MAPEGROUT ME05
High performance, shrinkage compensated, high-flow micro-concrete and thick section grout
Technical Date Sheet
MAPEGROUT ME06
High strength, shrinkage compensated, super-flow micro-concrete.
Mapegrout ME 06 is used for structural repair where particular thickness and state of deterioration requires the use of high flow concrete and for, grouting of gaps with thickness ranging from 30-250mm.
Mixing ratio – One 25 kg of Mapegrout ME 06 with 3.1-3.4 litres of water.
Yield: 12.3 liters / 25 kg.
Packaging: 25 kg bags
Technical Date Sheet
Mapegrout Rapid
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
Where to use:
Fine-grained, natural-finish skimming layer for internal and external concrete, cementitious and lime-mortar render, old quartz paint, scratch-effect plastic coatings and glass or porcelain mosaics.
Application examples:
Levelling and finishing concrete walls, cementitious renders or cement lime mortar before painting.
- Smoothing walls, even over existing paint such as washable acrylic paints, quartz paints, textured paints, etc. as long as they are sound, clean and well anchored.
- Smoothing over glass or porcelain mosaics on walls.
- Smoothing gypsum wall-board panels (treated beforehand with Primer G).
- Smoothing mineral wood panels (such as Eraclit).
Packaging:Â 25 kg bags.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.4 mm.
Packaging: 25 kg bags.
TDS
MAPEGROUT T60
28,00 د.إ (incl. VAT)Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete.
Use Mapegrout T60 to repair damaged concrete surfaces such as balconies and corners of columns and beams.
Mapegrout T60 is also recommended for repair work in tunnels, canals and water works in general.
Mapegrout T60, mixed with about 17% water, and 0.25 of Mapecure SRA?forms a very workable mortar with a thixotropic consistency that is easily applied on vertical surfaces without shuttering.
The product may be used without adding Mapecure SRA, when environmental conditions permit excellent curing.
Mapegrout T60 is applied by trowel, float or sprayer onto damp substrates that are sound, rough and free of loose particles, and been saturated with water beforehand.
Repairs up to 40 mm thick in a single coat can be made.
Mapegrout T60 meets the minimum requirements of EN 1504-3 standards for R4-class structural mortar.
Consumption
18.5 kg/m2 per cm of thickness.
Packaging
25 kg bags.
TDS
WEBERAD 225 MB
180,00 د.إ – 1.490,00 د.إPrice range: 180,00 د.إ through 1.490,00 د.إ (incl. VAT)weber.ad 225 MB contains no iron. Added to mortar,
it increases internal and external bonding of cement
and confers to the product strength, waterproofing,
flexibility and resistance to abrasion and to chemicals.
Technial Data Sheet
webertec 311 MC
webertec 311 MC is a ready-to-use micro concrete made of selected sand and aggregates, special cement and additives. It can be used where high compressive strength is required. webertec 311 MC is specially formulated to produce a shrinkage compensating micro concrete with high performance. webertec 311 MC can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.
Technical Date Sheet
PLANITOP FAST 330
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
TDS
PLANICRETE
90,00 د.إ – 390,00 د.إPrice range: 90,00 د.إ through 390,00 د.إ (incl. VAT)Applications:
Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive for cement based adhesive slurries for anchoring bonded screeds, filling holes or repairing damaged sections of screeds, cementitious floors, etc. Additive for spatterdash to provide anchoring for renders. Do not use pure Planicrete as a primer or slurry, always mix it with Portland cement, or when required, with Mapecem, Mapecem Pronto, Topcem or Topcem Pronto.
Technical data:
Storage: 24 months. Protect from frost.
Consumption
depends on dilution and thickness of mortar.
Packaging
25 – 10 – 5 kg drums and 12×1 kg packs.
TDS
Weberep 331 Tx (25 Kg)
weberep 331 TXÂ is a ready-to-use mortar mainly made of sand (reconstituted grain size range), special cement, fibers and special additives that provide special properties: non-shrinking, thixotropic, high strength, high adhesion, compactness; its closed porosity slows down carbonation.
Technical Date SheetÂ
Weberep 360 FFR (20 Kg)
Weberep 360 FFR is a dry pre-mixed polymer-modified
cementitious coating based on hydraulic binders, siliceous
filler, water retaining agents and other admixtures. Weberep
360 FFR is available in white and light-grey.
Technical Date Sheet
Online store with a wide selection of Building material.
Discover a vast selection of high-quality building materials at unbeatable prices. From foundation to finishing touches, we have everything you need for your construction or renovation projects. Shop with ease, enjoy fast delivery, and build with confidence.
Building material with a modern form of art
Transform your spaces with building materials that blend durability with modern artistry. Our collection combines innovative designs with high-quality materials, creating structures that are both functional and visually stunning. Build with style, strength, and sophistication.