Screed
Weberfloor Rapid (50 kg)
Original price was: 20,00 د.إ.18,99 د.إCurrent price is: 18,99 د.إ. (incl. VAT)weberfloor rapid is a rapid drying, ready to use polymer modified hydraulic binder, shrinkage controlled semi-dry floor screed. Comparing to the traditional semi-dry screed, this premixed screed is the best solution for use in all instances where logistics conditions at sites are complicated. Additionally, it improves the quality, strength and drying speed of the screed over standard cement screeds.
Technical Date Sheet Â
WeberTec MC 1
Original price was: 23,00 د.إ.20,90 د.إCurrent price is: 20,90 د.إ. (incl. VAT)webertec MC1 is a durable mono-component micro concrete
made of selected sand and aggregates, special cement,
green binders and additives. Its special formulation, flowable
consitency and convenient packaging makes it easy to mix and
to place in congested areas.
webertec MC1 is recommended where high compressive
strength, high thicknesses and durability are required.
webertec MC1 is specially formulated to produce a shrinkage
compensating micro concrete that can be applied in
thicknesses ranging from 30mm to 200mm per layer although
greater thickness up to 300mm can be practiced depending
on the design of the repair job and level of steel reinforcement.
Technical Date SheetÂ
ADESILEX PG2 TG – 6 kg
Original price was: 180,00 د.إ.178,00 د.إCurrent price is: 178,00 د.إ. (incl. VAT)
PRIMER G
Price range: 90,00 د.إ through 390,00 د.إ (incl. VAT)PRIMER G
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 – extremely low emission level.
Storage: 12 months. Protect from frost.
0.1-0.2 kg/m2 depending on use.Packaging
25-10-5 kg drums and 12×1 kg packs.
Technical Data Sheet
TOPCEM PRONTO
Original price was: 30,00 د.إ.28,00 د.إCurrent price is: 28,00 د.إ. (incl. VAT)Ready-mixed mortar with high thermal conductivity, ideal for heated screeds.
ADVANTAGES:
- High thermal conductivity, ideal for heated screeds
- Ready to use
- Rapid-drying
- High mechanical strength
- Negligible hygrometric shrinkage
Technnical Date Sheet
WEBERAD 225 MB
Price range: 180,00 د.إ through 1.490,00 د.إ (incl. VAT)weber.ad 225 MB contains no iron. Added to mortar,
it increases internal and external bonding of cement
and confers to the product strength, waterproofing,
flexibility and resistance to abrasion and to chemicals.
Technial Data Sheet
PLANICRETE
Price range: 90,00 د.إ through 390,00 د.إ (incl. VAT)Applications:
Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive for cement based adhesive slurries for anchoring bonded screeds, filling holes or repairing damaged sections of screeds, cementitious floors, etc. Additive for spatterdash to provide anchoring for renders. Do not use pure Planicrete as a primer or slurry, always mix it with Portland cement, or when required, with Mapecem, Mapecem Pronto, Topcem or Topcem Pronto.
Technical data:
Storage: 24 months. Protect from frost.
Consumption
depends on dilution and thickness of mortar.
Packaging
25 – 10 – 5 kg drums and 12×1 kg packs.
TDS
Lata Screed PM-20
17,00 د.إ (incl. VAT)LATASCREED PM-20 ready to use screeding mix, blend of carefully selected raw materials,
Portland cement, polymer and graded fillers. When mixed with water produces quality screed with
controlled shrinkage and improved mechanical strength for early installation. The screed follows the
code of practice of BS 8204-1:2003 and EN 13813:2002.
TDS
Weberep Epo 420 SC Kit (27.8 Kg)
215,00 د.إ (incl. VAT)weberep epo 420 SC is a three- component system based on epoxy resins and selected fillers. It provides a resilient system for floor repairs and resurfacing, non absorbent and dust free. The selected fillers enable the system to hold thickness and give weberep epo 420 SC a high resistance to abrasion, as well as a high tensile and compressive strength.
Technical Date Sheet
Lata Screed PM 30
17,50 د.إ (incl. VAT)LATASCREED PM-30 ready to use screeding mix, blend of carefully selected raw materials, Portland cement, polymer, fibers, and graded fillers. When mixed with water produces quality screed with controlled shrinkage and high mechanical strength ready for early installation. The screed follows the code of practice of BS 8204-1:2003 and EN 13813:2002.
Technical Date Sheet
3701 Fortified Mortar
16,00 د.إ (incl. VAT)3701 Fortified Mortar is a polymer fortified blend of carefully selected
polymers, portland cement and graded aggregates. 3701 Fortified
Mortar does not require the use of latex admix, you only need to add
water to produce thick bed mortar with exceptional strength. 3701
Fortified Mortar is an approved substitute for 226 Thick Bed Mortar
mixed with 3701 Mortar Admix.
TDS
Online store with a wide selection of Building material.
Discover a vast selection of high-quality building materials at unbeatable prices. From foundation to finishing touches, we have everything you need for your construction or renovation projects. Shop with ease, enjoy fast delivery, and build with confidence.
Building material with a modern form of art
Transform your spaces with building materials that blend durability with modern artistry. Our collection combines innovative designs with high-quality materials, creating structures that are both functional and visually stunning. Build with style, strength, and sophistication.