Tile Adhasive
KERAPOXY EASY DESIGN
Original price was: 220,00 د.إ.210,00 د.إCurrent price is: 210,00 د.إ.poxy grout with improved workability and high aesthetic qualities
ADVANTAGES:
- Easy to apply
- Non-absorbent and easy to clean
- Certified anti-bacterial and mould-resistant
- Helps keep the interiors more healthy
- Complies with haccp food safety management procedures
- Wide range of colours
- Suitable for grouts up to 15 mm wide
Techincal Data Sheet
KERAFLEX MAXI S1
Price range: 65,00 د.إ through 75,00 د.إHigh-performance polymer modified cementitious adhesive.
Advantages:
- No vertical slip
- Extended open time
- High performance
- Suitable for laying large porcelain and natural stone tiles.
TECHNICAL DATA:
Pot life of mix: more than 8 hours.
Open time: 30 minutes.
Waiting time before grouting:
– on walls: 4-8 hours;
– on floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12004: S1 – deformable.
Colours: white and grey.
Application: N° 4, 5, 6 or 10 notched trowel.
Storage: 12 months.
Consumption: 1.2 kg/m ² per mm of thickness.
Packaging:
– grey: 20 kg bags;
– white: 20 kg bags.
Technical Date Sheet
webercol Premium (25 Kg)
Price range: 61,00 د.إ through 65,00 د.إWebercol premium is a high performance cement-based
polymer modified adhesive for fixing all types of tiles and
stones onto interior and exterior floors and walls. Webercol
premium has very strong bonding in wet areas. It is suitable
to fix tiles on low porosity substrates such as power floated
concrete.
Webercol premium exceeds standard requirements EN12004
and is classified as C2TE. werbercol Premium is non-sagging
and slip resistance “T” with ability to perform in extended
open time conditions “E”.
Technical Date Sheet
WEBERCOL PLUS (25KG)
Price range: 26,00 د.إ through 31,00 د.إwebercol plus is a ready mix cement-based high
performance polymer “latex” modified tile adhesive for
internal and external use. col plus has a strong bonding
effect, used for adhering large tiles, or in cases of permanent
exposure to high degrees of humidity. It can be used in a
damp environment, and is water resistant. col plus is
non-sagging and classified “T” (slip resistant) according to EN
12004 for tile adhesives
Technical Date Sheet
ADESILEX P10 -25 KG
30,00 د.إAdesilex P10 is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E) classified as C2TE.
Adesilex P10 is a high-performance cementitious adhesive for use with ceramic, mosaic, and stone tiles
Interior and exterior floor and wall bonding of: ▪ installation of normal or heavy weight mesh-backed or paper-faced glass, ceramic, vitrified and marble mosaic. ▪ installation of ceramic, vitrified tiles, and natural stone.
Some application examples Adesilex P10: ▪ Bonding of ceramic, vitrified, glass, and marble mosaic on cementitious renders, from the top towards the bottom. ▪ Bonding mosaic on non-planar substrates, without tiles, slipping. ▪ Bonding mosaic on gypsum board panels. Adesilex P10 mixed with Isolastic diluted 1:1 with water: ▪ Bonding mosaic in swimming pools on renders or on substrates waterproofed with Mapelastic. ▪ Internal bonding of mosaic on existing ceramic and vitrified tiles. ▪ Bonding small sized ceramic and vitrified tiles on renders in swimming pools.
Technical Date Sheet
KESRASET-25 KG
Price range: 15,00 د.إ through 22,00 د.إInternal walls and Doors, and external Doors bonding of ceramic tiles and mosaics, tile on tile application, vitrified tiles, single-red and double-red tiles.
Bonding of ceramic mosaics on paper or mesh, absorbent single-red or double-red ceramic tiles on: • traditional render or cement mortar; • ordinary or floating reinforced, cementitious screeds provided they are sufficiently cured and dry.
RECOMMENDATIONS
Do not use Keraset:
on wood and wooden mixtures; • on gypsum board or lightweight concrete walls; • on metal, rubber, PVC, and linoleum surfaces; • for the installation of glass mosaics; • for the installation of tiles that require an adhesive thickness greater than 10 mm; • with large size tiles;
TDS
ULTRABOND ECO 4 LVT
298,00 د.إdrumULTRABOND ECO 4 LVT
Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Density (g/cm³): 1.20.
Waiting time: 0-10 minutes.
Open time: 20-30 minutes.
Set to light foot traffic: 3-5 hours.
Ready for use: 48-72 hours.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months. Protect from frost.
Application: N° 1 notched trowel, TKB A1, A2.
Consumption: Mapei N° 1 trowel: 0.25 to 0.30 kg/m².
Packaging: 16 kg and 5 kg drums.
Technical Date Sheet
PRIMER G
Price range: 90,00 د.إ through 390,00 د.إPRIMER G
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 – extremely low emission level.
Storage: 12 months. Protect from frost.
0.1-0.2 kg/m2 depending on use.Packaging
25-10-5 kg drums and 12×1 kg packs.
Technical Data Sheet
Eco Prim T Plus
Original price was: 750,00 د.إ.700,00 د.إCurrent price is: 700,00 د.إ.Universal acrylic primer for all types of absorbent and non-absorbent substrates
ADVANTAGES:
- Universal primer
- May be diluted up to 1:4 with water according to area of use
- Easy to apply with a brush or roller
- Suitable for use on epoxy or polyurethane waterproofing primers
- Adhesion promoter
- Insulator between gypsum and concrete
- Dust fixative
- Absorption regulator
- For floors and walls
- EMICODE EC1 PLUS – Very low emission of volatile organic compounds (VOC)
- Blauer Engel – DE – UZ 113
- Consumption 30-150 g/m2
- Drying time 0-60 minutes according to area of use
Techncial Date Sheet
MAPESIL AC
Original price was: 35,00 د.إ.32,00 د.إCurrent price is: 32,00 د.إ.ADVANTAGES:
- High elasticity
- Mould-resistant (BioBlock® technology)
- Solvent-free
- Strong and durable
- Maximum guarantee
- Perfect adhesion
- Smooth and elastic
- High thermal and chemical resistance
- Excellent durability
- Wide range of colours
TECHNICAL DATA:
Movement in service: 25%.
Modulus of elasticity at 100% elongation: 0.35 N/mm².
Shore A hardness: 20.
Workability time: 10 minutes.
Colours: 34 colours + transparent.
EMICODE: EC1 Plus – very low emission.
Application: extrusion gun.
Consumption: 3.1 linear metres per 310 ml cartridge (10×10 mm section).
Packaging: 310 ml cartridges.
.
TDS
Online store with a wide selection of Building material.
Discover a vast selection of high-quality building materials at unbeatable prices. From foundation to finishing touches, we have everything you need for your construction or renovation projects. Shop with ease, enjoy fast delivery, and build with confidence.
Building material with a modern form of art
Transform your spaces with building materials that blend durability with modern artistry. Our collection combines innovative designs with high-quality materials, creating structures that are both functional and visually stunning. Build with style, strength, and sophistication.